Accidental Discharge Protocol

The following protocol should be reviewed, adapted to the special needs of the facility, and posted in a conspicuous location. The disinfectant solution(s) and decontamination procedure(s) to be used must also be specified. List solution, concentration, and method of use for spills, as decided upon. Specific information on techniques can be found in Decontamination and Disinfection Procedures.

Liquid spills

• Prevent or stop discharge into drains immediately.
• Treat drains that received discharge according to a predetermined plan (to be developed and posted in conjunction with sewer system authorities).
• Wipe up remaining liquid with paper towels or mop. Wring excess liquid from the mop into waste tank and treat the mop with appropriate disinfectant. Rinse and allow to dry thoroughly.
• Allow the towels to dry before disposal.
• Isolate area of floor receiving spill and treat with disinfectant. Allow to sit. Wash area and rinse with water. Allow to dry thoroughly.
• Disinfect any work areas contaminated by the spill, giving careful attention to cracks and crevices, and allow to dry undisturbed.
• Be especially mindful of the soles of shoes or saturated clothing. Apply disinfectant and allow to sit.

Solid material

• Recover as much solid material as possible with a brush, scoop, forceps, etc., and place in another container for reuse or disposal. Disinfect instruments used in the cleanup process.
• Isolate area of floor receiving spill and treat with disinfectant. Allow to sit. Wash area and rinse with water. Allow to dry thoroughly.
• Disinfect any work areas contaminated by the spill, giving careful attention to cracks and crevices, and allow to dry undisturbed.
• Be especially mindful of solid waste material that may become imbedded in the soles of shoes or stick to soiled clothing. Apply disinfectant and allow to sit.

Slowing the Spread of the Zebra Mussel Contents

Protocol for Responsible Monitoring Procedures